CONTESSA 32 ASSOCIATION Homepage
Forum Home Forum Home > Technical Help > Mast, Rigging and Sails
  New Posts New Posts RSS Feed: Wire rigging diameter
  FAQ FAQ  Forum Search   Calendar   Register Register  Login Login

Wire rigging diameter

 Post Reply Post Reply
Author
Message
Sandy View Drop Down
CO32 Members
CO32 Members


Joined: 21 Jun 2010
Location: Inverness
Online Status: Offline
Posts: 3
Post Options Post Options   Quote Sandy Quote  Post ReplyReply Direct Link To This Post Topic: Wire rigging diameter
    Posted: 23 Nov 2017 at 2:29pm
What diameter rigging wire does everyone use?

I'm replacing the standing rigging on Solan Goose, and it looks like we've got 6mm 1x19 wire all round. But in the rigging schedule for the Contessa 32 on the association website it specifies 5mm for the lower shrouds?

Our u bolts for the lower shrouds have noticeably pulled the deck up, though they have now been reinforced with steel plates under the deck. I had the thought that perhaps they had been over tensioned with the larger wire.

I was considering compact dyform wire, partly as an upgrade and hopefully as it would feel nicer on the hands, but not sure if it is a good idea, or if I could downsize the lower shrouds at the same time.

Back to Top
Alastair D Pugh View Drop Down
CO32 Members
CO32 Members


Joined: 03 Dec 2012
Online Status: Offline
Posts: 17
Post Options Post Options   Quote Alastair D Pugh Quote  Post ReplyReply Direct Link To This Post Posted: 24 Nov 2017 at 9:09am
Hi Sandy, long time no see

Marisca has 5mm lowers, 6mm elsewhere with replacement due again this winter.  I seem to remember hearsay that Jeremy reckoned going bigger was unnecessary and just moved the weakest link to the deck. 

Cheers, Alastair
Back to Top
Sandy View Drop Down
CO32 Members
CO32 Members


Joined: 21 Jun 2010
Location: Inverness
Online Status: Offline
Posts: 3
Post Options Post Options   Quote Sandy Quote  Post ReplyReply Direct Link To This Post Posted: 25 Nov 2017 at 8:14am
Thanks Alastair.

Yep poor Solan Goose has been languishing in the marina for the past few years while our kids were wee, but it's time for a refit ready for next summer.

Turns out our forestay and backstay are even bigger at 7mm.
I Would downsize, but don't want to have to deal with changing the shroud fittings on the mast, so think I'll just stick with the same for now, and be careful not to overtension. Waiting for a surveyor to do an inspection too (for the insurance) so will see what he thinks about the deck.

Plenty other jobs needing done as well!
Cheers, Sandy
Back to Top
Alan Dixon View Drop Down
CO32 Members
CO32 Members


Joined: 07 Sep 2009
Location: Sunderland
Online Status: Offline
Posts: 47
Post Options Post Options   Quote Alan Dixon Quote  Post ReplyReply Direct Link To This Post Posted: 29 Nov 2017 at 8:47am
Hi, I have just renewed Charlotte’s standing rigging 6 mm caps fore and back stay, with 5 mm inners.
Check with a rigger I don’t think there is any difference in the tang for the inners between 5 and 6 mm. Would be policy if you don’t know the age to change the bottle screws at the same time.

Alan Dixon "Charlotte"
Back to Top
Sandy View Drop Down
CO32 Members
CO32 Members


Joined: 21 Jun 2010
Location: Inverness
Online Status: Offline
Posts: 3
Post Options Post Options   Quote Sandy Quote  Post ReplyReply Direct Link To This Post Posted: 05 Dec 2017 at 10:01pm
Thanks for the update Alan.

All the sizing info I could find for the shroud terminals seems to indicate that the 5mm version is small than the 6mm.  I have the round spoon shaped ones as opposed to T terminals. In any case decided to just stick with the 6mm lowers to save any bother, will just need to be careful to avoid over tensioning.

Was planning to change the bottle screws as well.

Cheers, Sandy
Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down