Print Page | Close Window

Tactik base unit location

Printed From: CONTESSA 32 ASSOCIATION
Category: Technical Help
Forum Name: Electrical Systems, Navigation and Safety equipment
Forum Discription: Problems or questions about Contessa electrical systems
URL: http://www.co32bb.org/forum_posts.asp?TID=293
Printed Date: 16 Aug 2018 at 1:38am


Topic: Tactik base unit location
Posted By: gregcope
Subject: Tactik base unit location
Date Posted: 08 Jun 2012 at 1:49pm
Hi all,

Any ideas on where?

Present inking was high in the stb. Forward saloon locker on the bulkhead.  I already have a hole near here and power can be run along the inside of the locker.

Does anyone have the compass and Nmea unit too?  Will the shroud base interfere with the compass?



Replies:
Posted By: Rclark1977
Date Posted: 09 Jun 2012 at 2:29pm
Hi Greg,

I mounted my base transmitter unit on the stbd side behind the seat/bunk backs (mine fold down), the compass is on the main bulkhead on the stbd side in the under bunk locker (i.e  under your feet if you are lying on the stbd bunk).  The NMEA unit is mounted on the bulkhead directly in front of the chart table I.e facing you as you sit at the chart table. This is because all my other instruments and associated NMEA wiring is there.  This has all worked fine for the last 3 years. Hope this helps

Regards

Richard


-------------
Richard Clark
Carolina GBR3274
Mob: 07976 251440


Posted By: gregcope
Date Posted: 09 Jun 2012 at 3:19pm
Thanks. Sounds about the same as what I was planning although I was going to look to out the compass in/around the same place.

Thanks for the detail.



Print Page | Close Window